Contact << http://www.boxcrafting.com/ >> for current information on our Boxmakers. Marlene Watson has taken over the Boxmaker line.

Alphabeticalist Topics --- A / B / C / D / E / F / G / H / I / J-K / L / M / N / O / P / Q / R / S / T / U-V / W / X-Y-Z -- Our guide to the Internet

STARSHIP ENTERPRISE, a cardstock model by Ron Caudillo.

I consider this a masterpiece of model design, building & photography -- Marty Carbone.

The links below go straight to artwork (jpegs). With my printer, a HP 4M Laserjet, they print out at the
right size (7.5" x 10"), measured from the outside edge of the borders, when I set the printer to print at 63%.

It is important that you check the size of your printout and adjust your printer to give the right size
before attempting to build the model.

Ron has the following to say about page 5;

"A quick note on page 5. Page 5 is double-sided so I will be sending a page 5b. When printing page 5
and the back side, it is important to have the user's printing program center the output of these 2 pages
onto the page via their software settings or else the printing will not match up correctly. This does not
matter for the other 7."

These plans are new as of 11/25/03 and should be considered experimental. Be aware that there may be
bugs. If you build this model, please report back to the address in the contact link above and tell us if you
run into any problems, so those problems can be eliminated.

Instructions for Assembly / Cover / page 1 / page 2 / page 3 / page 4 / page 5 / page 6 / page 7

Plans / page 1/ page 2 / page 3 / Page 4 / Page 5a / Page 5b / page 6 / page 7 / page 8 /

Hi Martin, / Here is a photo of my prototype Enterprise model. / Ron Caudillo